Gas Detector Wall-Hung

Product Details:

We are offering Chlorofluorocarbons Gas Leak Detector to our clients.

Product Details:

Application and Design Since CO2 is always the main product during combustion in presence of 02, therefore it provides a good measure of accumulated exhaust and air quality. It also can also be measured more precisely and reliably than any other toxic gas. With rapid development of environment friendly modern cars that with catalytic converters generate 100-900 times CO2, as much CO. Therefore, CO2 itself is a greater threat to safety and health of the people present.

It includes a CO & CO2 sensor integrated with a controller to affect energy savings by reducing ventilation rates during low movement and at the same time taking care of local building code by maintaining CO levels within permissible limits. The system also provides a smoke exhaust in case of fire.

Product Details:

Liquefied petroleum gas (LPG) is a colourless, odourless liquid which readily evaporates into a gas. Normally an odorant has been added to it to help detect leaks. LPG may leak as a gas or a liquid, it is heavier than air. LPG vapours can run for long distances along the ground and can collect in drains or basements. When the gas meets a source of ignition it can burn or explode.

Product Details:

Marketed under the brand name of TINSELPRO, we bring forth CNG/ LPG Gas Detector that are wall-hung household gas alarm designed to detect the concentration of combustible and toxic gases or vapours. It provide a visual and audible signals when the gas concentration reaches presetting range and ventilate gas or shut off gas supply to avoid fire, explosion, suffocation, and other hazardous accident. The alarms are available for liquefied petroleum gas (LPG), natural gas (methane), propane, hydrogen, town gas and smoke. These can be installed at residents and other establishments. We are among the most preferred CNG leak detector manufacturers and exporters and are also reckoned as leading manufacturer of LPG gas detectors. The new digital model offered by us is wide appreciated and availed by the customers.

Additional Information:

• Item Code: LPG-GD-02-M

Product Details:

AmmoniaLeak Detector is a colorless gas with a characteristic pungent smell. It is lighter than air, its density being 0.589 times that of air.The sensing element of Ammonia Gas Detector is a metal oxide semiconductor which has low conductivity in clean air. In the presence of a detectable gas, the sensor''s conductivity increases depending on the gas concentration in the air. A simple electrical circuit can convert the change in conductivity to an output signal which corresponds to the gas concentration. The Ammonia Gas Detector has high sensitivity to ammonia gas. The sensor can detect concentrations as low as 1 ppm in the air and is ideally suited to critical safety-related applications such as the detection of ammonia leaks in refrigeration systems and ammonia detection in the agricultural field has been fabricated with high-tech methodologies using well tested material at our manufacturing unit.

Additional Information:

• Item Code: TPGS051AF1-TPGS051BF1-TPGS051CF1

Product Details:

We are offering Gas Leak Detector Domestic to our clients.

Additional Information:

• Item Code: D-GD-01-M

Product Details:

We are offering Methane Ch4 Gas Detector to our clients.

Product Details:

Product Details:

We are offering Tinsel Pro CNG Gas Leak Detector to our clients.

Product Details:

CO2 Gas Detector can be used in hazardous areas like indoor and outdoor and basement, where its concentration may increase, stored, used, etc. such as chemical, metallurgy, etc. CO2 Gas Detector detects the leaked gas and shows the leaking concentration in LCD display. Once detected, it will raise an alarm if theleaked gas concentration crosses the preset value.

Detector Operation:

• Plug-in the detector and after few seconds it will display the present concentration of CO2 gas in ppm level.
• As the concentration of gas increases in atmosphere, it will show the higher value.
• Detector raises the alarm at 1000 ppm (parts per million) by default. The buzzer will give alarming.
• User can set the alarming level value as per requirement in the range of 0000 PPM - 5000
• PPM with the help of switches.
• Concentration of CO2 gas in healthy atmosphere is 400 ppm

 

if user want to change alarming level (in ppm):

• Plug in the detector and wait for the display which shows the concentration of the gas.
• Now press the program switch and “set alarm value” display will appear on the screen.
• To select the new alarm level press again the program switch to move the cursor to desired digit.
• Now press the up switch to increase the digit and down switch to decrease the digit to set your desired value.
• Either wait for few seconds or press the enter switch to set the new level.
• Now desired alarming value is set.